Simple, but feature-rich, is the ideal device to provide customised and successful treatment to your patients

All that you need
The result of more than 40 years of technological know-how, iLux PLUS is the new landmark in laser therapy. Thanks to the wide range of possible configurations and the fact that you can easily customise your therapy with the many tools at your disposal, iLux PLUS is your best partner to quickly and effectively treat a huge number of pathologies.
Up to 4 wavelengths
Like the other MECTRONIC devices with the most advanced performances, iLux Plus uses different wavelengths or combinations of them, depending on the chosen therapy and the patient's characteristics. The wavelengths, which can be activated, deactivated or combined, are four:
650 nm
It enables rapid activation of the haemoglobin oxidative process, accelerating ATP production. By transferring the right amount of energy to muscles and tendons, it promotes their tissue regeneration.
810 nm
It increases ATP production by activating the oxidative process of haemoglobin. The correct energy supply promotes regeneration of muscle and tendon tissue.
980 nm
Absorbed mainly by water, it optimises action on thermo- and mechanoreceptors. With the E²C mode, it interacts well with the peripheral nervous system for a rapid analgesic effect, thanks also to the Gate Control.
1064 nm
Highly directionable, it delivers the right dose of energy on the noxa, with excellent synergy between antalgic effect and the control of inflammatory processes, as well as deep activation of metabolic processes.
The number of wavelengths varies depending on the device model: there are models with one wavelength (650 nm or 1064 nm), with two (810 nm + 980 nm or 810 nm + 1064 nm) and models with three (810 nm + 980 nm + 1064 nm).
Up to 30 W of average power
Since many of the pathologies that affect the musculoskeletal system are located deep inside, laser therapy, to be successful, must be able to penetrate as much tissue as possible. One of the advantages of MHEL Therapy is exactly that it goes beyond the superficial layers, reaching the origin of the pathology, thanks to two properties of the laser: wavelength and power. For the same wavelength used, the higher the power, the more energy is transmitted to the tissue lesion. iLux PLUS can achieve up to 30 W average power, with 60 W peak power.
13 emission modes
More than 40 years of cooperation with research centres, universities and specialists in the field have enabled us not only to explore the potential of different emission modes but also to develop and patent two new ones. These are E²C and PBM, designed to achieve unequalled therapeutic results.
 The fastest way to overcome the pain 


With Mectronic's patented E²C stochastic emission, you can generate laser pulses of variable power and duration that interact properly with the peripheral nervous system and generate an important analgesic effect.
the latest innovation in photobiomodulation
PBM is an innovative stochastic emission mode designed to achieve maximum photobiomodulation, respecting emission times and dark periods highlighted in numerous scientific studies. 
ScanX Mode 
The practical ScanX module allows you to perform MHEAL Therapy treatments in automatic mode, i.e. without operator intervention, while maintaining a high level of safety and guaranteeing the best therapeutic performance. 


Automatic, safe and effective treatments
ScanX: the solution that automatizes the treatment

A special pivot arm allows orthogonal treatments, much more powerful than those of scanning lasers, by means of two conical applicators with magnetic attachment, while the patient can interrupt the therapy at any time thanks to the practical safety button.


A customised wavelength mix
MHEL Therapy uses different wavelengths and wavelength mixes within the therapeutic window in order to meet every possible medical need.
Software Features
 Therapy Management
The MecOS 3.0 OMNIA system, one of the most sophisticated software available on the market, thanks to its interactive touch-screen and 10.1" high-resolution display, will help you from the very first moment in managing your therapy in an intuitive and simple way, providing a practical and user-friendly approach to one of the most important aspects of your business.
Real Time Monitoring
The MecOS 3.0 OMNIA operating system provides immediate feedback on therapy parameters, allowing the operator to easily change the set wavelengths and emission modes, change the phase of the protocol, save it as a favourite and monitoring tissue temperature.
Protocols By Effects

iLux Plus has specific treatment protocols for each of the 5 main effects of MHEL Therapy: biostimulating, analgesic, anti-inflammatory, anti-oedema and decontracting. Once the preferred mode has been selected, iLux Plus will guide the operator in setting the most suitable treatment to reach the chosen effect.
Interactive Therapeutic Protocols
The device includes a collection of 90 interactive treatment protocols, designed and created taking into account the different tissue nature, phototype and age of the patient and divided into phases according to the pathology to be treated. The protocols are accompanied by images describing the treatments to be used.
Intuitive Creation Of Customised Protocols
The dedicated editor for the creation of customised protocols allows you to configure, thanks to the simple and intuitive graphic interface, protocols complete with all therapeutic parameters, with up to 5 different steps. It is possible to monitoring and modify the value set in each phase as required. 
Protocols For Scanx Module
Protocols are available for pathologies, effects and non-localised pathologies both in manual mode (with the operator using the handpiece) and in automatic ScanX mode. For theScanX mode, the system provides a large number of preset protocols. 
Wave Editor
The iLux PLUS includes the Wave Editor, a powerful application that allows you to create customised emission modes that are associated with all active wavelengths.  
Advanced therapy management 
 Light Blade: designed for you

A high-performance tool that is simple, light and comfortable to use, designed for your hands and technical skills.

This is the Light Blade handpiece, ergonomic and ultra-compact, designed to reduce operator stress and improve efficiency.

We have thought about everything: the Finger Switch that allows you to activate the laser emission easily and effortlessly, and the polychromatic LED system integrated in the instrument that keeps you updated in real time on the progress of the therapy.


Do you want to change the applicator? Nothing could be easier: choose the one best suited to the therapy and the patient from the wide range available from Mectronic and connect it to the handpiece with the patented magnetic attachment.


Therapy control is closely linked to the handpiece and applicators you use during treatment.
 PLUS variable focus applicator
PLUS applicator ENT
PLUS fixed focus applicator
PLUS Applicator large
PLUS small applicator
PLUS small spherical applicator
Why iLux PLUS from Mectronic?

Products designed and manufactured in Italy

To manage every situation and keep the customer updated

Many education opportunities to continue advancing knowledge of laser therapy

Excellent customer support and after-sales service ensures that your equipment is always in perfect working condition

Partnerships with several sports clubs

Over 25000 laser devices produced
Technical Specifications

iLux PLUS is the light, powerful and compact device, available in different versions to suit your needs.

You can choose from multiple configurations with different power combinations.

Furthermore, you can extend the functionality of the iLux with the ScanX module and combine all the advantages of manual and automatic therapy in one device.

Operating System Real-Time owner MecOS 5.0
• 650 nm
• 810 + 980 nm
• 810 + 1064 nm
• 1064 nm​
650 nm - up to 3 mW
Up to 30 W
• Continuous (CW)
• E²C (patented stochastic mode)
• Antinf
• Puls1, Puls2, Puls3
• Dimmer
• Burst
• Custom
• Single Pulse
• Joule
• Timer
• Trigger Point
• Manual
• Single Pulse
• Burst
• Custom Mode
Protocols in order to maximize therapeutical results:
• Biostimulant
• Anti-inflammatory
• Decontracting
• Anti-edema
• Analgesic
SCANX automatic mode (Optional)
• Over 150 pre-set protocols
• Creation of custom modes
Graphic and acoustic control system for laser emission at the exit from the handpiece, according to CEI EN 60825-1
10.1" HD IPS color display with capacitive touch screen
100÷240V 50÷60Hz
• Without cart: 295 x 265 x 150 mm
• With cart: 516 x 516 x 1017 mm
• Without cart: 5 kg
• With cart: 24 kg
1-1000 ms
• Device: IPX0
• Handpiece: IPX0
• Pneumatic Foot Switch: IPX4
• 10°C ÷ 30°C
• 30 ÷ 75% non-condensing humidity
• 700 ÷ 1060 hPa
• -10°C ÷ 55°C
• 10 ÷ 100% non-condensing humidity
• 500 ÷ 1060 hPa
Maximum emission allowed on skin 5600W/m²
Maximum emission allowed on cornea 9W/m²
Nominal Ocular Hazard Distance 2,4m
EN 60601-1; EN 60601-1-2; EN 60601-2-22
IIB Classification
2 Years


Set yourself apart from the competition, invest in the well-being of your patients

Calculate your ROI and contact us for more information!

How many patients come to you every week?

How many of them could you treat effectively with iLux PLUS?

With its extreme efficacy, reduced recovery time and maximised treatment results, iLux PLUS guarantees you a rapid return on your initial investment (ROI).